GMA 347’s digital voice recorder helps you manage the demands of a busy cockpit. The automatic voice recorder continuously captures the last two and one-half minutes of audio switched through the panel. So if you ever miss an assigned frequency or part of a clearance, simply press the “Play” button to recall the message for review.
GMA 347's automatic squelch option makes your entire audio experience quieter and clearer. This option filters out radio static and interference. Yet, for those situations when faint, far-off audio signals can be blanketed by ambient noise, the 347 offers manual squelch adjustment.
In addition, GMA 347 has a full-duplex telephone interface with intercom isolation and disable capability. This feature allows private telephone calls by the pilot or copilot, or multi-party calls with crew and/or passengers. GMA 347 also comes with three more unmuted, unswitched inputs with individual volume control for additional audio capabilities
With convenient, LED-illuminated button controls for audio selection — as well as split comm capability for pilot and co-pilot, GMA 347 is easy to use. If the GMA 347 ever needs to be removed for service, a “configuration module” makes sure that previous audio settings are retained in the unit.
Physical & Performance: |
|
Unit dimensions, WxHxD: | 6.29"W x 1.3"H x 7.79"D (16 x 3.3 x 19.8 cm) |
Weight: | 2.4 lb (1.1 kg) |
Other: |
|
Telephone interface: | tel ringer input; dedicated full-duplex tel interface (no PTT keying required) |
ICS (intercom system): | 6 position intercom (individual VOX circuits for each of the 6 mic positions) |
ICS isolation modes: | 4 - All, Pilot, CoPilot, Crew |
Transceivers: | 3 - COM1, COM2, COM3 |
Additional receiver inputs: | 5 - NAV1, NAV2, ADF, DME, AUX (Note that using the AUX input requires using a remote switch) |
Music source input: | 2 Stereo music source inputs - isolation modes differ from 340 |
Music input impedance: | 5 kilo-ohms |
Music frequency response: | 50Hz - 20kHz |
Speaker output: | speaker output for radios or PA function (10W into 4 ohm or 8 ohm) |
PA function: | pilot selectable - requires pressing and holding SPKR button to change state |
Marker beacon: | dual sensitivity |
Manual squelch: | yes |
Automatic squelch: | yes |
SmartMute (includes SmartMute marker audio muting): | yes |
Intercom volume controls: | yes |
Manual VOX level controls: | 2 (pilot, co-pilot/passengers) |
MASQ (master avionics squelch processing for noise reduction): | yes |
Split com (CoPilot transmits and receives on Com2 while Pilot transmits and receives on Com1): | yes |
Failsafe (connects Pilot PTT, mic and headset to COM1 if unit is turned off): | yes |
Clearance recorder: | yes |